6-Watt Blue Spot Creator

Advanced Photonic Sciences Introduces Model LE-445-6000-SC Spot Creator,
a 6-Watt Blue Diode Laser with Focusing Optics

Features

  • Simple Installation On X-Y-Z CNC Machines
  • Adjustable Focusing Lens to Create 50, 80, and 100 Micron Diameter Spots
  • Create High Intensities on Target
  • Self-Contained Fully Integrated Laser Module Including High Power Blue Diode, Active Cooling, Beam-Forming Optics, and Power Supply
  • Stable Output Power
  • Precision Engineering
  • Rapid Engraving, Etching, and Marking
  • Modulate Up To 250 kHz
  • Proportional Control in CW Mode Using 5V CW Signal
  • High Efficiency
  • Simple to Power Up and Operate

Applications

  • Most Advanced High Power Blue Laser For Laser Engraving, Etching, and Marking
  • Higher Speed Materials Processing Due to High Power and Small Focal Spot Size
  • Create Symmetric Spot Size Down to 50 Microns, Perfect For Precision Engraving, Etching, and Marking Most Metals, Including Stainless Steel
  • Use to Engrave, Mark, Cut, and Drill a Wide Variety of Metals and Soft Materials, Including Foam, Plastics, and Various Woods
  • Perfect Pump Source For Ti:Sapphire Ultrafast Oscillators
  • Pump Other Solid-State Lasers Including Pr:YLF, Cr:LiSAF, Cr:LiCAF, Cr:LiSGaF, and Cr:BeAl2O3
  • Wide Area Illumination Applications, Including Laser Light Shows

Several application videos are available online:

Stainless Steel Color Engraving: https://www.youtube.com/watch?v=sOY7Lp6-Ing

Engraving Graphics 1: https://www.youtube.com/watch?v=WKuc_-HzkIk&t=2s

Engraving Graphics 2: https://www.youtube.com/watch?v=-qLpNTel1DY&t=

Foam Cutting: https://www.youtube.com/watch?v=1P_ARxF2piw&t=

Cutting Forms of Foam: https://www.youtube.com/watch?v=9G6sH9FRFaE

Cutting Padding Material of Foam: https://www.youtube.com/watch?v=Dul7ONXuWk4

Stamp Engraving: https://www.youtube.com/watch?v=EcaMVoqboPw

 

Specifications

Model LE-445-6000-SC
Wavelength (nm) 445 ± 5
Output Power (mW, Typical) 6000 (-10 to 25 oC)

5300 (25 to 40 oC)

Output Beam Transverse Mode Lower Order Mode, Near TEM00
Polarization (Vertical, ± 2 o) Contrast Ratio 100:1
Power Stability After Warm Up (%) < 1
Focal Spot Diameter (μm)

f=30 mm

f=50 mm

f=70 mm

50

80

100

Maximum Modulation Frequency (kHz) (TTL) 250
Modulation Voltage Range (V) 0.2 – 5.0
Power Up Rise Time (μsec) 1.4
Power Supply Input (VDC/mA) 9-12/4000
MTTF (Hours) > 10,000
Cooling Method Fan
Laser Dimensions (mm) 81 x 62 x 40
Operating Temperature (oC) -10 to 40
Storage Temperature (oC) -10 to 85

LE-445-6000SC Datasheet

A Note About Laser Safety

The LE-445-6000-SC Spot Creator Laser is a Class 4 laser device, and not a toy. The laser is capable of blinding and can produce serious burns to the skin. It is meant to be used in OEM applications that incorporate adequate laser safety measures and is not CDRH compliant. APS assumes no responsibility for users that do not follow adequate laser safety protocols, such as the use of laser glasses with the proper amount of Optical Density at the operating wavelength of 445 nm, or do not take measures to protect the skin or eyes. In applications such as do-it-yourself laser engraving, marking, or cutting X-Y-Z machines, it is the responsibility of the user to provide adequate shielding from scattered laser light to protect the eyes.

APS Exclusive Distributor in United States and Canada

APS has been appointed Exclusive Distributor of Model LE-445-6000-SC Spot Creator Laser in the United States and Canada by Lasertack GmbH of Kassel, Germany. APS will provide distribution, support, application assistance, and servicing from our facility in Friendsville, Pennsylvania. Please contact us for ordering, pricing, and applications support at info@apslasers.com.